Lovibond® Water Testing Tintometer® Group

SD 320 Con

Stock Code
724700

Product Name
SD 320 Con

Test / Range

Resistivity 0.005 ...500 kOhm/cm
Salinity 0.0 .. 70.0 g salt/kg water
Temperature -5.0 ... +150.0°C
TDS 0 ... 5000mg/l





  • Picture 1


The SD 300 series is a range of waterproof hand-held meters for drinking  water, cooling and boiler water, waste water, pool water and surface water applications.

The SD 320 Con measures Conductivity, Salinity, TDS and Temperature. As conductivity depends strongly on temperature, each conductivity value is only valid at the corresponding temperature. Therefore, the instrument supports temperature compensation ie referring the conductivity to a reference temperature (selectable: 20°C or 25°C).

NOTE: There are three variants of the SD 320 Con

Order Code: 724700 (Set 1)
Contains the instrument and Conductivity Cell LC 12 (measuring range 0-200 mS/cm) 

Order Code: 724720 (Set 2)
Contains the instrument and Conductivity Cell LC 16 (measuring range 0-1000 mS/cm) 

Order Code: 724710 (Set 3)
Contains the instrument and Pure Water Electrode (measuring range 0-1000 mS/cm)

Case containing:

 

Order Code: 724700 (Set 1)
Contains the instrument and Conductivity Cell LC 12 (measuring range 0-200 mS/cm), batteries, manual and warranty information. 

Order Code: 724720 (Set 2)
Contains the instrument and Conductivity Cell LC 16 (measuring range 0-1000 mS/cm), batteries, manual and warranty information 

Measuring Ranges                      
Number 5
Smallest range 0.000 ... 5.000 µS / cm *         or
0.0 ... 500.0 µS / cm**
Largest range 0 ... 5000 µS / cm *         or
0 ... 1000 µS / cm**
Resistivity 0.005 ... 500.0 kOhm / cm (depends on cell constant)  
TDS 0 ... 5000 mg/l (depends on cell constant)
Salinity 0.0 ... 70.0 (g salt / kg water equals PSU = Practical Salinity Unit)
Temperature -5.0 ... +150.0°C
+23.0 ... +302.0°F
Pt1000 or NTC (10 kOhm)
Supported Cell Constants 4.000 ... 15.000 / cm -1
0.4000 ... 1.5000 / cm -1
0.04000 ... 0.15000 / cm -1
0.004000 ... 0.015000 / cm -1

Depends on cell constant of used
electrode:
*   cell constant 0.01 / cm
** cell constant 0.1 ... 1.2 /cm

 

 
Accuracy  
Conductivity ±0.5% of reading
±0.1% FS (depends on electrode)
Temperature ±0.2°C
(-5.0 .... +100.0°C)

 

Connections  

Conductivity, Temperature

1 x pole bayonet connector for connection of different measuring cells
Supported Temperature Sensors Pt1000 or NTC 10K)
Interface / ext. Supply 4-pole bayonet connector for serial interface and supply
(with accessory USB 300)
Display Two 4.5-digit seven-segment display (15mm and 12mm)
Protection Class IP67 (housing and connections)
Dimensions 160 x 86 x 37mm (H x W x D) inc. protection cover
Weight 250g inc. battery and protective armouring
Housing Impact resistant PA 6 G B30 housing with pop-up clip
Armouring  Shock-absorbing protective armouring
Power Supply 2 x AAA battery (included). Power consumption: <6.25mA
Battery Life 160 hours

 

Stock Code

Reagent

Test

Qty



Stock Code

Name


19805040

Conductivity Cell LC 12

19805045

Conductivity Cell LC 16

722250

Conductivity Standard Solution 1413 uS/cm

724620

USB 300 cable

724625

GSOFT 3050 Data Transmission Software

725060

Case with foam insert


Choose a parameter